Harvester Bar Bible - Update 04/2023

Quality Control: draught bag-in-box cider

The use of Bag-in-Box for draught, still ciders and perries will allow an extended shelf-life, enabling products to remain in peak condition to the very last drop in the bag. Dispense can either be direct from the bag via its integral tap, or using an adaptor via a hand pull.

How to use the HAND PULL DISPENSE ADAPTOR: Supplied with these instructions are the following:



1 adaptor



1 section of spacer pipe



1 Jubilee Clip 1 cleaning tap



1. Remove old fitting from pipe by cutting off or by undoing the existing Jubilee Clip. 2. Slide the Jubilee Clip over the pipe and leave loose. 3. Push adaptor into end of tube and tighten jubilee clip if too tight soften tube with hot water and if too loose use the section of spacer pipe to pack out the tube. 4. Remove red safety tag from tap. 5. Fit adaptor over tap ensuring the lip of the tap is seated squarely on top of the washer and turn screw cap on top to open tap, thereby clamping the adaptor and opening the tap, allowing product into the delivery line. 6. We strongly recommend cleaning the line before the first use and every week thereafter. To do this disconnect adaptor from tap. Fit the enclosed cleaning tap into adaptor and turn the screw cap. This opens the tap and the non-return valve within it, allowing fluids to pass through. Submerge the end of the tube along with adaptor and cleaning tap into a container of line cleaning solution and proceed as normal. NB. Should you ever lose the cleaning tap, one can be cut off a used Bag-in-Box.